Tool records
- Tools, instruments and vehicles as their own asset types.
- Serial number, make, model, photo and warranty dates.
- Statuses of your own, such as available, in use or out for calibration.
Tool tracking software showing who has every tool and where it is
See every tool, test instrument and spare unit with its holder, location and calibration date. Every handover is recorded with approval.
Book a demo
FieldEx is a field service and asset management (FSM+CMMS) application. As tool tracking software, it records every tool, test instrument and spare unit with the person or store holding it. It logs each handover with approval. It also tracks calibration certificates and inspections, so nothing goes out of date in a van.
Who holds each tool, and where it is now.
Every handover logged, with approval.
Calibration and inspection dates tracked with reminders.
What FieldEx does as tool tracking software
Every tool, instrument and spare unit gets its own record, holder and history. You always know who has it and whether it's fit to use.
The same records drive calibration and maintenance.
Holder and location
- A responsible person named for each tool.
- Tools held in a store, a zone or a technician's own stock.
- A search by type, status, location, store or technician.
Handovers
- Tools moved between stores, technicians and sites by transfer.
- Each transfer approved by the team responsible.
- Many pending transfers approved at once.
Tools on the phone
- Transfers created in the app, scanning labels.
- A technician's own tools checked on the phone.
- Tool records viewed in the app.
Labels
- QR or barcode labels printed for tools in a choice of sizes.
- A scan to open the tool's record or move it.
Calibration certificates
- Certificates per tool, each on its own calibration cycle.
- Reminders before the due date, by email, in the app or both.
- The calibration certificate uploaded to its record.
Inspections
- Inspections per tool, on the schedule each one needs.
- Each linked to the checklist it uses.
Tool requests
- Requests for a specific tool or any tool of a type.
- Approval in one or more levels.
- Consignment notes as PDFs when tools leave a store.
History and use
- Every movement logged, with who, when, from and to.
- Jobs, readings and maintenance on each tool's record.
- Utilization and downtime for each tool.
A named holder for every tool and instrument
Each tool in FieldEx has a responsible person and a current location, so accountability doesn't end when the tool leaves the store.
In FieldEx, every tool, instrument or spare unit is an asset of its own type. Its record holds the serial number, make, model and photo. Each can have a named responsible person. Its current location is a store, a zone or a technician's own stock.
Statuses are your own, such as available, in use or out for calibration, so the list shows what can be issued today. Tools your technicians bring themselves can be recorded the same way.
Find any tool in seconds, in the store or in a van
Search by type, status, location, store or technician. FieldEx shows where each matching tool is and who holds it.
Hours go every week on finding the torque wrench, the thermal camera or the spare pump that someone borrowed. Often the tool is in a van two streets away.
In FieldEx, a search finds tools by type, category or status. It also searches by location, zone, store or the technician holding them. The result shows each tool's holder and status. A coordinator can ask the right person to bring it, or send the nearest technician who already has one.
Tools in a technician's own stock are tracked the same way as tools in the store.
Every handover recorded, with approval
Moving a tool to another store, technician or site is a transfer, approved by the team responsible, so the record always shows who has it.
A tool handed over in the car park leaves no record. When it goes missing, nobody knows who had it last.
In FieldEx, a transfer names the tool, where it's coming from and where it's going: a store, a storage location or a technician. The team responsible for that stock approves it, and approvers can clear many pending transfers at once. Once approved, the movement is logged with the date and the people involved.
Technicians create transfers in the app by scanning the tool's label, so recording a handover takes seconds.
Calibration certificates that don't lapse unnoticed
Each instrument's calibration certificate has its own interval and reminders, so recalibration is booked before it falls due.
The instrument's status can show it as out for calibration while it's away, and a scan of its QR label opens its record, certificates included.
In FieldEx, a calibration certificate on an instrument has its own interval, the issuing laboratory and a start date. Reminders go out before the due date, by email, in the app or both. The new certificate is uploaded to the instrument's record when it comes back.
Pre-use and periodic inspections for tools
Give each tool its inspection interval and checklist, and FieldEx creates the inspection record when it's due.
Tools often need several kinds of check:
- quick checks before use, such as the cable on a hand-held power tool
- weekly checks
- fuller examinations every few months, such as portable appliance testing
In FieldEx, a tool can carry inspections on whatever schedule it needs, each linked to the checklist technicians complete. Each inspection shows as overdue, due or completed, so a missed check stands out.
Overdue inspections also mark the tool as not compliant on its record, so it can be pulled before the next job.
Scan a tool's label to open it or move it
Print QR or barcode labels for tools, and technicians scan them to see the tool's record or hand it over.
Typing serial numbers on a phone is slow and invites mistakes, especially for small items like gauges and meters.
In FieldEx, you print labels for any set of tools in a choice of sizes and page layouts. Technicians scan a label from the app's home screen to open the tool's record or start a transfer. They scan storage locations in the same way.
When many tools move at once, their serial numbers can be pasted into the transfer in bulk.
Book a demo
Tool requests and consignments with approval
Request a specific tool or any tool of a type, and approvers sign it off before it leaves the store.
Larger teams want a request before a tool moves: a technician asks, a supervisor agrees, the store issues it.
In FieldEx, a request can name specific tools or ask for any available tool of a type. It passes through one or more levels of approval. The requester is notified at each step. A consignment note records tools sent out to another store and can be printed as a PDF.
Once a request is approved, the transfer for specific tools can be started straight from it.
The full history of every tool
Every tool keeps its movements, jobs, readings, certificates and inspections on one record, for as long as you own it.
In FieldEx, a tool's record lists every movement with who, when, from and to. It also shows the jobs the tool was used on or repaired under. Its meter readings, certificates and inspections sit on the same record. Changes to the record itself are logged too.
Maintenance plans can service tools by date or by usage hours, and each tool shows its utilization and downtime.
Vans, generators and plant tracked like any other tool
Vehicles, generators and hire plant get their own asset types, readings, inspections and service plans. Larger equipment is tracked alongside hand tools.
Technicians log readings, such as mileage or running hours, against the record. Maintenance plans service it by date, by usage or both, and inspections and certificates carry their own reminders. Every move between sites or people is a transfer, recorded and approved like a hand tool.
A service fleet isn't only drills and meters. Vans, generators, access platforms, lifting gear and test rigs move between sites too. In FieldEx, each of these can be its own asset type with its own statuses.
What each person gets from FieldEx tool tracking
Storekeepers see who has every tool, technicians hand over tools in seconds, and managers know every instrument is in calibration.
Storekeeper
Every tool's holder, location and status.
Technician
The tools they hold, and handovers by scanning a label.
Supervisor
Tool requests and transfers to approve.
Quality or safety lead
Calibration certificates and inspections with reminders.
Coordinator
The nearest technician who already has the right tool.
Operations manager
Tool utilization and downtime.
Tools tracked in the same system as the jobs that use them
FieldEx is field service management and a CMMS in one system, so tools are tracked, maintained and used on jobs in one place.
Separate tool-crib software knows where a drill is. It doesn't know which job the drill was used on or when it was last serviced. In FieldEx, the tool's record links its movements, its jobs, its maintenance plan and its calibration together.
Technicians already use the app for their jobs, so recording a tool handover isn't another login.
Tool tracking connects to these features:
To compare tools, read what to look for in CMMS Software.
EC Solutions: removed equipment tracked back to the right store
EC Solutions (aviation, Uruguay) had no real-time way to see which store removed equipment went back to, or when its status changed to not in use.
With FieldEx, removed equipment is automatically marked as not in use. It is assigned to the correct return store, which the technician selects in the field. Every swap is recorded with technician and customer sign-offs.
Read the EC Solutions Story
Chubb: equipment movements tracked in real time
Chubb, an integrated security provider in Malaysia, lacked clear oversight of equipment movement and usage as its operations expanded.
With FieldEx's built-in asset tracking, Chubb now monitors asset movements, compliance and use in real time. It also runs SOP enforcement and time tracking for its field teams.
Read the Chubb Story
Questions storekeepers and service managers ask about tool tracking in FieldEx
What is the best tool tracking software for field service teams?
The best choice knows who has each tool and whether it is due for calibration. FieldEx records every tool, instrument and spare unit with its holder and location. It logs each handover with approval and tracks calibration certificates and inspections with reminders. Because it is also a CMMS, tools can be maintained and linked to the jobs they're used on.
Can FieldEx show who has a tool right now?
Yes. Each tool shows its current location: a store, a zone or a technician's own stock. A search finds tools by type, status, location, store or technician.
Can technicians hand tools over on the phone?
Yes. Technicians create transfers in the app by scanning the tool's label, and the responsible team approves them.
Do tool transfers need approval?
Yes. The team responsible for the stock approves each transfer, and approvers can clear many at once.
Can FieldEx track calibration dates?
Yes. Each instrument can carry calibration certificates with their own intervals and the certificate file on its record. Reminders go out before the due date, by email, in the app or both.
Can we schedule tool inspections?
Yes. Tools can carry inspections on their own schedules, each linked to a checklist, with overdue, due and completed status.
Can we print labels for our tools?
Yes. QR or barcode labels print in a choice of sizes and page layouts for any set of tools.
Can technicians request a tool?
Yes. Requests can name specific tools or any tool of a type, and pass through one or more levels of approval.
Can we see the history of a tool?
Yes. Each tool's record lists its movements with who, when, from and to. It also holds the tool's jobs, readings, certificates and inspections.
Can tools have their own maintenance plans?
Yes. Maintenance plans can service tools by date, by usage hours or both, whichever comes first, like any other asset.
Can FieldEx track vans and generators as well as hand tools?
Yes. Vehicles, generators and hire plant can be their own asset types, with readings such as mileage or running hours. They also carry inspections, certificates and maintenance plans by date or usage.
Can we use our own tool statuses?
Yes. Each asset type has its own statuses, such as available, in use or out for calibration.
Can we add many tools at once?
Yes. Existing asset registers can be uploaded, and serial numbers can be pasted in bulk when many tools move in one transfer.
Does FieldEx track tool utilization?
Yes. Each tool shows its utilization and downtime, calculated from its records, and the figures are available in reports.
They can also carry their own inspections, certificates and maintenance plans, due by date or by usage. One record then shows who holds each item and when its next check is due.
How long does it take to set up tool tracking in FieldEx?
There's no setup fee. Customers, sites, assets and past jobs can be uploaded. FieldEx helps with setup, and training is included. See Setup and Training.
You can also set FieldEx up yourself with guides, videos and the in-app AI assistant, which answers questions as you go.
Once we know your requirements and your data is ready, FieldEx can be implemented in as little as a week with standard features for small businesses. Larger setups and custom work take longer.
