After-Sales Service for Equipment Distributors: A Practical Guide

Learn how equipment distributors manage after-sales service, from tracking serial numbers and warranty claims to automating maintenance contracts and first-time fixes.
The FieldEx Team
November 16, 2026
Header image

TL;DR:

After-sales service works when every unit you sell becomes a record with its serial number, customer, site, warranty and contract. Every request then comes in through one front door, gets checked as warranty or billable at the start, and ends with proof of the work done. Offer a service contract before the warranty runs out, and the customer has a reason to stay.

Selling the machine is the easy part. The hard part starts when it stops working at 4:55pm on a Friday and the customer rings you, not the manufacturer. They don’t care whose name is on the nameplate. They care who is coming to fix it, and when.

This guide walks through how equipment distributors can run after-sales service so that the answer to “who’s coming, and when?” is never “let me check”.

What does after-sales service actually include?

It starts the day the equipment is delivered and runs for as long as the customer owns it. For most distributors it covers:

  • Installation and commissioning: getting the machine in and running properly
  • Training: showing the customer’s team how to use it
  • Warranty handling: fixing covered faults, and recovering the cost where the manufacturer allows
  • Planned maintenance: servicing before things break
  • Repairs: for the things that break anyway
  • Spare parts: having the right part when it’s needed
  • Service contracts: agreeing all of the above in advance, for a fee

Manufacturers’ own service lists look much the same: inspections, commissioning, repairs, service contracts, parts and on-site training. What changes for a distributor is where the money and the paperwork sit, and we’ll get to that.

Why is after-sales service worth the effort?

Because it tends to be where the profit is. Deloitte puts the average operating margin from aftermarket services at about 2.5 times the margin on new equipment sales. A McKinsey analysis across 30 industries found aftermarket margins of 25 percent, against 10 percent for new equipment.

A fair warning: those figures describe manufacturers, not distributors, and they aren’t brand new. Treat them as a direction of travel, not a promise. Your own numbers will differ.

There’s also a softer reason. Nobody remembers the sales pitch, but everybody remembers the week the machine sat broken. How you handle that week decides whether you get the next order.

How is after-sales service different when you sell equipment you don’t make?

You’re in the middle. You promise the customer a fix, but the manufacturer decides what it will pay for, and on which paperwork. That gap is where money quietly leaks away.

Manufacturers usually want proof before they reimburse a claim. One engine maker, for example, asks for proof of purchase and installation, the original work order and the engine’s serial number. One heating and cooling distributor’s training notes warn that a part may not count as warranty if the equipment was never registered, or if the person claiming isn’t the original owner.

Deadlines and documents vary from one manufacturer to the next, and some deadlines are short. So the first job is to read each manufacturer’s warranty terms and write down what they ask for. Warranty, consumer-protection and right-to-repair rules also differ from country to country, so check what applies where you sell.

What should you record for every unit you sell?

Start with a simple record for each machine:

  • Model and serial number
  • The customer, and the site where it lives
  • Installation date
  • Warranty start and end dates
  • Any service contract covering it
  • Photos or documents from installation

Without this, every service call begins with detective work. Which unit is it? When did we install it? Is it still covered? Some field service guides describe the result as digging through old records before every single visit, which is exactly as slow as it sounds.

Capture the details at delivery or installation, while the machine is in front of you. Registering the unit with the manufacturer matters too, because an unregistered machine can complicate a claim later.

How should customers report a fault?

Through one front door. If requests arrive by WhatsApp, phone calls, emails and the occasional shout across the showroom, nobody can say what’s open, who owns it, or how long it has been waiting.

Better options are a QR code on the machine itself, a customer portal, or a single number that feeds one system. A QR code is especially handy, because the request arrives already tied to the right unit. 

A request that already knows the model, the serial number and the history saves that first, slightly painful phone call: “Which machine is it, and where is it?”

Read How to Replace WhatsApp Fault Reporting with QR Codes

How do you decide whether a repair is under warranty?

Decide at the start, when the job is created. That prevents two expensive mistakes: billing a customer for work that was covered, and absorbing the cost of work that wasn’t.

A simple check:

  1. Is the unit within its warranty dates?
  2. Is it covered by a service contract?
  3. Is the fault one the warranty actually covers? Wear parts and misuse are often excluded, so check the terms.
  4. Is it a repeat of a recent fault on the same unit?

That last one is worth a flag. A fault that keeps returning deserves a closer look before the next visit, and sometimes a conversation with the manufacturer.

How do you improve first-time fix?

First-time fix means solving the problem on the first visit, without a return trip. Three things drive it, and all three are settled before the technician leaves the workshop:

  • The right technician. Match the job to someone who knows that brand and model, covers that region and has the time. Sending a generalist to a specialist machine is a good way to book a second visit.
  • The right information. The unit’s history, the customer’s description of the fault and the correct checklist for that model.
  • The right parts. If the likely parts are in the van, the job closes on the day.

Remember: first-time fix on its own doesn’t tell you whether service is good. A technician who closes jobs quickly and leaves half of them to bounce back looks great on paper and terrible to customers.

What proof should every visit leave behind?

A finished job should leave a trail anyone can follow:

  • Before-and-after photos
  • A completed checklist
  • Parts used, with quantities
  • Arrival and departure times
  • The customer’s signature
  • A completion report

Distributors have one extra wrinkle. A single job may need a report for the customer, another set of documents for the manufacturer’s warranty claim, and sometimes a template your biggest customer insists on. Keep all of them attached to the same job. When one job’s paperwork is scattered across three folders, one of the three goes missing, and it’s always the one the manufacturer asks for.

How do you turn warranty customers into service-contract customers?

Offer the contract before the warranty ends, not after. The best moment is a few months before expiry, while the customer still remembers how smoothly (you hope) the last visit went. Put a date in the diary for each unit.

A couple of terms worth knowing:

  • Attach rate: the share of the equipment you sell that comes with a warranty or service contract.
  • Renewal rate: the share of contracts that renew, counted by number and by value.

Link each contract to a maintenance schedule so that visits are created automatically and nobody has to remember them. Then keep an eye on the things that tell you whether the contract is healthy: renewal rate, on-time visits and the margin on the agreement.

Which numbers should you track?

Keep the list short enough that someone actually looks at it:

  • First-time fix rate: how often the first visit solves the problem
  • Response time against promise: how quickly you reached the customer compared with what you agreed
  • Repeat-visit rate: how often you go back for the same fault
  • Warranty recovery: how many eligible claims you submitted, and how many were paid
  • Contract attach and renewal rates
  • Time from job done to invoice sent

Field service people also talk about “leakage”. Warranty leakage is money you could have recovered from the manufacturer but didn’t. Contract leakage is similar: service you deliver under a contract that isn’t tracked or billed properly. Both are quiet, and both add up.

How do you set up after-sales service, step by step?

  1. List every unit you’ve sold, with serial numbers and customers.
  2. Add warranty dates and contract status to each one.
  3. Set up one front door for requests.
  4. Decide your warranty-or-billable check, and who makes the call.
  5. Create job types and checklists for installation, maintenance and repair.
  6. Set response-time targets by customer or contract.
  7. Define the proof every job must leave behind.
  8. Review the numbers monthly, and adjust.

You don’t need to do all eight at once. Steps 1 to 3 alone will make an immediate difference.

When does a spreadsheet stop being enough?

A spreadsheet is fine for a handful of machines and one very organized person. It struggles when there are more customers, more technicians, or more than one person updating it, and it can’t remind anyone about anything. If you have a tab for every customer and a different version on every manager’s laptop, you’ve probably reached that point.

Whatever you use, look for:

  • A record for each unit, with warranty and contract dates
  • Jobs linked to the unit and its history
  • Response-time tracking
  • A customer portal or QR codes for requests
  • Mobile checklists, signatures and photos for technicians
  • Reminders for planned servicing

‍

Make after-sales the part customers remember

FieldEx is field service and maintenance software that equipment distributors use to run after-sales service without spreadsheets or lost paperwork. Every unit you sell becomes a permanent record, connecting commercial sales to field execution:

  • Complete unit records: Track every machine by serial number, customer, site, sales order, warranty dates, and active service contract. (FieldEx Asset Management)
  • One front door for requests: Customers scan a QR code on the unit or log into a branded portal to report faults directly into your queue. (FieldEx Asset Management)
  • Skill-based dispatch & mobile execution: Assign jobs by region, brand, or model, while technicians log checklists, parts used, photos, and digital signatures on iOS or Android. (FieldEx Scheduling & Dispatch)
  • Automated maintenance & dual-purpose reports: Trigger scheduled visits automatically when a unit joins a contract, and generate separate branded PDFs from the same job: one for customer sign-off and one for manufacturer warranty claims. (FieldEx Preventive Maintenance)‍

Two of our customers show how this works in practice. A foodservice equipment supplier in Southeast Asia runs installations, maintenance and repairs for 90+ technicians in one system. Jobs are matched to technicians by region, skills, equipment brand and model, and the customer and warranty documents for each job are kept together. Coffex, a coffee roaster and machine distributor, replaced paper service reports with mobile reports that customers sign on the technician’s phone.

Read the foodservice equipment supplier story | Read the Coffex story‍

You can try FieldEx free for 14 days, no credit card needed, or book a demo and we’ll set up a sample of your installed equipment with you.

‍

Frequently asked questions

What does after-sales service include? 

Installation, training, warranty handling, planned maintenance, repairs, spare parts and service contracts. For a distributor it also includes the paperwork with the manufacturer, which is easy to forget until a claim is due.

How do you manage warranty claims as a distributor? 

Keep a record for every unit (serial number, installation date, proof of purchase) and the original work order for every repair. Check each manufacturer’s terms and deadlines, and submit promptly with the documents they ask for.

How do you track the equipment you’ve sold? 

Give each unit its own record with its serial number, customer, site, warranty and contract. In FieldEx, every unit you sell becomes an asset linked to its customer, site, sales orders and contracts, with warranty details on the record and every job added to its history.

What is a good first-time fix rate? 

Industry averages sit in the high 70s percent, and best-in-class teams are near 88 percent. Track it alongside your repeat-visit rate, so you can tell quick jobs from finished ones.

How do you turn warranty customers into service-contract customers? 

Offer the contract a few months before the warranty ends, tie it to a maintenance schedule, and follow up on every renewal. Track attach rate and renewal rate so you can see what’s working.

Who should handle after-sales service: the distributor or the manufacturer? 

It depends on your agreement. Many distributors handle installation and first-line service themselves, and go to the manufacturer for parts and warranty reimbursement. Check your distribution agreement so you know who does what, and who pays.

What software do equipment distributors use for after-sales service? 

Software that keeps the installed equipment, warranties, contracts and service jobs together. FieldEx is built for this. Planned servicing can run by calendar, by meter reading or by whichever comes first, and it starts automatically when a new unit matches a plan. Customers can see their equipment and raise requests in a portal, and the office is alerted when a new job repeats a recent job on the same unit.

About the Author

Dashboard mockup

The FieldEx Team

FieldEx is field service management (FSM) and CMMS software in one platform, for teams that send technicians to sites and maintain equipment.