Retail store maintenance software for Malaysian outlets, chains and their contractors

Track Bomba fire certificates, PBT licenses, extinguisher servicing, competent person visits and every outlet's repair requests from head office.

Book a demo
Updated 19 Oct 2026
FieldEx scheduling board on desktop with a technician's inspection checklist open on the mobile app, as used by retail maintenance teams

FieldEx is a field service and asset management (FSM+CMMS) application for Malaysian retail chains and the contractors who look after their outlets. It tracks each outlet's Bomba and council renewals and plans fire, electrical and equipment checks. FieldEx turns outlet repair reports into contractor jobs with response targets.

What FieldEx does for retail chains and outlet maintenance contractors

From a convenience store in Kuching to a hypermarket in Shah Alam, each outlet has its own fire certificate, premises license, chillers and repair list. FieldEx brings them into one view for head office and the contractors on the ground. Book a demo with your outlet list.

Outlets and their equipment

  • Each outlet as a site, with address, map position and outlet contacts.
  • Chillers, freezers, air-conditioning units and lighting as assets at each outlet, in Asset Management.
  • Auto doors, shutters, fire panels and gensets as assets too.
  • Outlet codes, regions and formats kept in renamed identifier fields.
  • Every repair, inspection and part used on the asset's own history.

Renewals and certificates per outlet

  • Bomba fire certificates, PBT premises and signboard licenses and other permits tracked as recurring certifications on an asset record for each outlet, with due dates and reminders.
  • Certificates and license copies attached to the outlet's record.
  • Your contractor registrations and company licenses tracked with renewal reminders.
  • Overdue checks rescheduled automatically after the period you set.

Checks that run themselves

  • Monthly, quarterly and yearly checks on each outlet's site plan, raised automatically for whoever covers that outlet.
  • Chillers, gensets and air-conditioning serviced on date, running hours or the earlier of the two, in Preventive Maintenance.
  • A single plan for each outlet format, so a newly opened outlet starts with the right schedule.
  • Emails and alerts to the people you choose at each step, from the report to the fix.

Outlet repair requests

  • Outlet staff scan a QR code to report a fault without signing in, and FieldEx opens the job against that outlet.
  • Area managers with portal access raise requests with photos and follow progress.
  • Response and repair clocks by priority, with breach alerts, in Scheduling and Dispatch.
  • Jobs matched to service zone and live location.
  • Technician skills named after certificates, such as refrigeration or electrical qualifications, with expiry dates.

Contractors by region

  • Contractors across Peninsular Malaysia, Sabah and Sarawak work in their own logins, seeing only their outlets' jobs.
  • Jobs routed by skill, availability, shift and leave.
  • Jobs matched to service zone and live position.
  • Technician skills named after certificates, such as a wireman or chargeman certificate, with expiry dates.
  • The app is available in English, Bahasa Malaysia, Chinese, German or Spanish, chosen by each technician.

Technicians and contractors in each outlet

  • Each day's outlets, the asset's history and a map of the outlet on the FieldEx Mobile App.
  • Watermarked photos, parts used from the van and the outlet supervisor's signature on the job.
  • Check-in and check-out times recorded at each outlet, so visit times are never in dispute.

Parts and refits

  • Spare parts held per warehouse and per van, with transfers, approvals and low-stock alerts, in Spare Parts Inventory.
  • Outlet openings and refits run as one-off jobs with handover checklists that raise snag jobs.

The chain's own equipment and vehicles

  • Weighing scales, forklifts, test meters and service vans kept as assets, each with its serial or registration number and outlet.
  • Scale re-verification, Puspakom and calibration due dates as recurring certifications, with reminders and the certificate on file.
  • Maintenance plans for vans by date or odometer reading, and for forklifts by running hours.

Reports for head office

  • Jobs, renewals, SLA results and costs by outlet, region or contractor.
  • Downtime, MTBF and MTTR per asset, with repeat repairs flagged.

FieldEx also runs this kind of work for Hotel & Hospitality, Food & Beverage Equipment, Pest Control and Agriculture & Estate.

Which outlets need a Bomba fire certificate and a PBT license, and when are they renewed?

Shops of 3,000 m² or more in total floor area need a Bomba fire certificate, renewed every year. Every outlet also needs a yearly business premises license from its local council (PBT). The 2020 designated premises order sets the 3,000 m² threshold for shops under the Fire Services Act 1988. Large outlets such as hypermarkets and department stores therefore need the certificate. The premises license comes from the council under section 107 of the Local Government Act 1976. Majlis Bandaraya Johor Bahru, for example, asks for renewal within 30 days before the license expires.

What FieldEx does about it

  • Each outlet's dates in one place: fire certificate, premises license and signboard license each run as a recurring certification on an asset record for the outlet.
  • Reminders before the renewal window: reminders go to the people you choose, early enough for the Bomba or council renewal.
  • Fire checks before Bomba's visit: the outlet's fire system service is planned ahead of the certificate renewal.
  • Copies on file: each certificate and license attaches to the outlet's record.

How often must fire extinguishers in a shop be serviced?

Bomba doesn't set a fixed interval, so have a Bomba-registered competent person service each extinguisher as MS 1539 Part 4 and the maker's manual require. Bomba's eFEIS FAQ names MS 1539 Part 4 for maintenance and requires every extinguisher on the premises to be registered with its location. An extinguisher cylinder has a service life of 10 years.

What FieldEx does about it

  • Extinguishers as assets: each extinguisher at each outlet keeps its own history and install date.
  • Monthly checks by outlet staff: the monthly check runs as a recurring checklist on the outlet's site plan.
  • Annual service by your Bomba-registered contractor: the yearly service is raised for the contractor in their own login.
  • Ten-year replacement planned: the replacement runs on a maintenance plan with a 10-year interval on the extinguisher's record.

How often must an electrical competent person visit a store?

At least once a month, for outlets supplied at 600 volts or less through switchgear of 100 amperes or more. Regulation 67 of the Electricity Regulations 1994, published by Suruhanjaya Tenaga (ST, the Energy Commission), sets this. The visit is made by a competent person, such as an Electrical Services Engineer or an Electrical Supervisor. Under regulation 68, the inspector reports to the owner within two weeks. Every non-domestic installation is also tested at least once every five years, and protective relays at least every two years.

What FieldEx does about it

  • Monthly visits on the plan: the competent person's visit runs on each larger outlet's site plan, raised every month.
  • Reports within two weeks: the inspection report attaches to the visit, and an SLA step warns before the two weeks run out.
  • Five-yearly testing and relays: the full test and the two-yearly relay calibration each have their own recurring certification.
  • Findings become jobs: each item the inspector raises becomes its own repair job.

How often must an outlet's weighing scales be verified?

Verify every scale used for trade before its first use, and re-verify it every 12 months. That is the rule under the Weights and Measures Act 1972, as Metrology Corporation Malaysia (MCM) explains. MCM provides the verification and re-verification service for trade instruments. Using an instrument without valid verification is an offense. The Asia-Pacific Legal Metrology Forum adds that verified instruments are stamped, and the Ministry's Enforcement Division enforces the Act.

What FieldEx does about it

  • Each scale as an asset: checkout, deli and fresh-produce scales carry a serial number, the outlet and their own history.
  • Re-verification on a 12-month cycle: each scale's re-verification runs as a recurring certification, with reminders before it falls due and the certificate attached.
  • New scales verified before use: a scale added to an outlet can carry its first verification as a one-off job before it goes on the counter.
  • Faulty scales repaired: a scale reported by outlet staff becomes a repair job, followed by its re-verification.
  • Every outlet at a glance: the dashboard shows which scales are overdue or due in the next 7 days, across the whole chain.

How often should automatic doors at an outlet be checked?

Check automatic doors briefly every day and have them inspected every year. The American Association of Automatic Door Manufacturers (AAADM), an international reference, recommends both. The premises owner does the daily safety check. An AAADM-certified inspector does the annual inspection against ANSI A156.10, the standard for power-operated pedestrian doors.

What FieldEx does about it

  • A morning door check: the outlet's opening checklist can include the door safety check.
  • Yearly inspection by your door contractor: each door is an asset with its own annual inspection.
  • Faults raised at once: a failed check raises the door repair job with an SLA clock.
  • Each door's history: sensor changes and adjustments stay on the door's record.

How often should supermarket refrigeration be leak checked?

Check systems holding 5 tonnes of carbon dioxide equivalent or more at least once a year, using the EU's rules as an international benchmark. The EU's F-gas rules, Regulation (EU) 2024/573, set three bands. Systems under 50 tonnes are checked every 12 months, and 50 to under 500 tonnes every 6 months. Systems of 500 tonnes or more are checked every 3 months. A leakage detection system doubles each interval.

What FieldEx does about it

  • Each system on its own plan: chillers, packs and condensing units each carry their own leak check cycle.
  • Refrigerant top-ups recorded: custom job forms, set up with you during onboarding, can include number fields for refrigerant added, recorded against the job.
  • Leaks followed up: finding a leak opens a repair job, then a re-check visit once it's fixed.
  • Qualified technicians only: skills with expiry dates keep refrigeration jobs with qualified technicians.
  • Records that last: every leak check, top-up and repair stays on the system's history. The record is ready whenever an auditor, insurer or new contractor asks for it.

How do head office and contractors keep track of outlet repairs?

Give head office and contractors the same view of every outlet repair. In FieldEx, each report becomes a job carrying the outlet, the asset and a photo. It also has a priority and an owner. The response clock starts when the outlet reports the fault, not when someone reads a WhatsApp message. The job then goes to the contractor covering that region.

What FieldEx does about it

  • One channel for every outlet: QR codes and the portal replace phone calls and chat messages.
  • Routed by region: service zones send each outlet's jobs to the contractor who covers it.
  • Response times measured: SLA results by outlet, region and contractor show who meets the target.
  • Your data in Malaysia: where data residency is required, FieldEx can host your store data locally in Malaysia.
  • Operator evaluations tracked: a skill named after the forklift qualification, with an expiry date, shows when each operator's next evaluation is due.

How should a new outlet or refit be handed over to maintenance?

With FieldEx, an outlet opening or refit is handed over as one-off jobs. These cover the handover, every snag, then the first planned service for each new piece of equipment. Chillers, lighting and doors go onto the outlet's record on day one with their warranty details. The first breakdown then has a history.

What FieldEx does about it

  • Handover checklist: the opening or refit handover is a single job, with a checklist and photos of its own.
  • Snags assigned: every item that fails the handover becomes a separate job for the contractor responsible.
  • New assets with warranty dates: new equipment is added to the outlet with its warranty details.
  • Plans start at once: each new asset picks up its maintenance plan when it's added.

How do you manage maintenance after a store refit?

In FieldEx, a refit runs as a set of one-off jobs: the handover check, each snag, and the first service of each new asset. New equipment goes onto the store's record on the day with its warranty dates, so the first breakdown arrives with a record behind it.

What FieldEx does about it

  • Handover as a checklist: the refit handover runs as a one-off job with its own checklist and photos.
  • Snags as follow-up jobs: each failed handover item raises its own job, assigned to the right contractor.
  • New assets on day one: new chillers, lighting and doors are added to the store with their warranty dates.
  • Plans from the first day: each new asset picks up its maintenance plan as soon as it's added.
Customer story

Magnum, a Malaysian leisure and entertainment company, runs its jobs, inventory and reports on FieldEx. It manages jobs, inventory and SLA deadlines from one dashboard. Magnum reports a 25% increase in operational efficiency, with the field team it needs reduced from 55 to 41 people. Its outlets share the same pattern as a retail chain: many sites, scheduled checks and repairs tracked from head office.

Read the Magnum Story

Questions Malaysian retail chains ask about FieldEx

What does retail store maintenance software do?

It keeps each outlet's renewals, checks, equipment and repairs in one place, takes repair requests from outlets and sends them to contractors with response targets. FieldEx does this for chains and their contractors. See our guide to CMMS Software.

Can FieldEx remind us before Bomba and PBT renewals?

Yes. Each certificate and license is tracked as a recurring certification on an asset record for the outlet, with reminders before it falls due.

Can outlet staff report faults without an account?

Yes. A QR code at the outlet opens a short form with no login, and the report arrives as a job for that outlet.

Can each contractor see only their own outlets?

Yes. Contractors have their own logins and see only the jobs that involve them, controlled by roles and a hierarchy.

Can we track wiremen's and chargemen's certificates?

Yes. Name a skill after the certificate and give it an expiry date, and only holders get the jobs that need it.

Can one plan cover all outlets of the same format?

Yes. A plan applied to an outlet format picks up new outlets when they're added.

Can we compare maintenance costs between regions?

Yes. Jobs, SLA results and costs report and export by outlet, region or contractor.

Do technicians need signal inside the outlet?

No. Jobs and tasks can be downloaded and worked offline, with check-in, check-out and travel synced later.

How fast can a chain get started with FieldEx?

There's no setup fee. Once we know your requirements and your data is ready, FieldEx can be implemented in as little as a week with standard features for small businesses. Larger setups and custom work take longer. Outlets, assets and past jobs can be uploaded. FieldEx helps with setup, and training is included. Onboarding is in person in Malaysia as well as online. See Setup and Training.

How quickly can a retail chain start using FieldEx?

There's no setup fee. Once we know your requirements and your data is ready, FieldEx can be implemented in as little as a week with standard features for small businesses. Larger setups and custom work take longer. Stores, assets and past jobs can be uploaded. FieldEx helps with setup, and training is included. See Setup and Training.

Bring your outlet list and renewal dates to the demo

Book a Demo